Having Wi-Fi dead zones in your home can be frustrating so you’ll want to get rid of them as quickly as possible. Thankfully, you’ll find that it isn’t difficult to remedy this problem. Solving this problem is as quickly as purchasing a new Wi-Fi extender for Xfinity. With a good Wi-Fi extender, you’ll be able to enhance your home network and eliminate dead zones.
If you’re using Xfinity, you’ll need to learn how to set up the Wi-Fi extender with your Internet service provider. If you’ve never worked with these devices before, you’ll likely worry that it is going to be extremely tough. This isn’t the case, Below, you’ll find a simple guide for setting up your Wi-Fi extender to your Xfinity Internet connection.
See Also: Best wireless router for Comcast
How To Setup WiFi Extender With Xfinity
What Is A Wi-Fi Extender?
First, you should find out more about Wi-Fi extenders. What are they? What do Wi-Fi extenders do? It is simple. Wi-Fi extenders are signal boosters. A Wi-Fi extender will connect to your Wi-Fi network and amplify the signal so it can be sent over a longer distance. It is possible to connect the extender via Wi-Fi or by using an Ethernet cable. Once you’ve installed a Wi-Fi extender in your home, your network will be much better so you can connect to the Internet from anywhere in your home.
You have to understand that Wi-Fi extenders are similar to Wi-Fi modems and routers. There is a risk that you’re going to experience compatibility issues. With this in mind, you’ll have to be very careful about compatibility issues when purchasing a Wi-Fi extender. Whether you’re using a rented router or not, you need to make sure that your Wi-Fi extender is going to be compatible with it. Otherwise, you won’t be able to use the extender you’ve purchased.
If you’re rented a router from Xfinity, you’ll want to consider using the Xfinity xFi Pod. However, there are other extenders that will work fluidly with your system.
Xfinity has been making more and more devices in the past few years. The company has worked diligently to improve its modems and routers. In addition to this, it has released the Xfinity xFi pod. These devices can be rented from Xfinity so you’ll need to pay another monthly fee. You can buy them online too. Using xFi pods is a good idea because they will remove the guesswork from the equation. You’ll know that they’re going to work because they’re from Xfinity. They’ll work well when combined with any Xfinity device.
You can use multiple pods at once. This is a good idea to solve the problem and extend your Wi-Fi network’s range.
Installing Your Xfinity xFi Pods
If you’ve decided to use Xfinity xFi pods, you’ll need to learn how to set them up. The good news is that the process is very convenient. Xfinity has done an excellent job making it easy for newbies and advanced users. All you need is a Wi-Fi connection, a smartphone with Bluetooth, and the xFi pods. To get started, you will need to download the xFi pods’ app on your smartphone. You can download the app from the Google Play Store or Apple’s App Store. Once you’ve launched the app, you can log in using your Xfinity username and password.
Make sure that your phone is connected to the Wi-Fi network and it will do everything else for you. If you need more information, you can find it by clicking on the button in the bottom right corner. Once you’ve completed these steps, you need to plug in one of your xFi pods. It is a good idea to keep the xFi pods at least 50 feet away from your router. After that, you can find the xFi device on your mobile app. This will connect the pod to your network.
Now, you can begin plugging in the other pods. Be sure to do so one at a time so they will have time to connect to the network. Once you’ve done this, you will be able to change the pod’s name. You can also manage their settings through the mobile app. These device uses smart technology so the system will familiarize itself with your usage. Then, it can adjust the settings accordingly. This means that your Wi-Fi network will improve vastly in the days to come.
It is easier to rent or buy xFi pods because they’re specifically designed for the Xfinity Internet service. However, you may decide that you want something else. You may believe that you’ll get better results from using a different extender. If you feel this way, you should not hesitate to purchase an extender from a different company. The possibilities are endless. If you want to use a different extender, you’ll need to find out how to connect that extender to your network.
Whether you go with NETGEAR or Linksys, you need to find out how to install the extender so you can eliminate your home’s dead zones. The process is similar so it should work for most devices.
Installing Another Wi-Fi Extender With Xfinity
To begin installing your Wi-Fi extender with your Xfinity Internet service, you should make sure your Internet is working. Connect your phone to your Wi-Fi and make sure everything is working as intended. Then, you’ll want to go ahead and plug the extender into a power outlet. Once you’ve done that, you may need to press the on/off button. Once the power LED lights turn on, you’ll want to go ahead and connect to the extender’s Wi-Fi network.
Use your computer or smartphone to connect to the extender’s Wi-Fi network. With a NETGEAR extender, you’ll need to connect to the NETGEAR_EXT network. In most cases, there will be no password but it could be a password. You will likely be warned that the Internet is not available. This is normal.
Configuring The Extender
Once you’ve connected to your Wi-Fi extenders, you’ll want to open a web browser and visit mywifiext.net. From here, you will be able to set up your new Wi-Fi extender. Tap New Extender Setup and accept the terms and conditions. You will be able to set your username and password. You’ll also be able to set up two security questions. Once you’ve set these things, you can connect the extender to your home’s Wi-Fi network.
You can adjust the settings before saving them. After you’ve completed these steps, you can begin using your new Wi-Fi extender.
Tips For Installing Your New Wi-Fi Extender
Wi-Fi extenders are an effective and affordable way to extend your home’s network. Just remember that you’ll need to install the device properly to ensure that you get more bang for your buck. If you install the Wi-Fi extender in the wrong place, there is a chance that you’re not going to get satisfactory results. This can be problematic. With that being said, you should go above and beyond to make sure that the device is installed correctly and in the right place.
Below, you’ll find tips for installing your new Wi-Fi extender correctly.
- Placement Is Key
First and foremost, you should understand that placement is very important. If you install the extender in the wrong place, you’re going to run into a lot of problems. You may need to experiment so you might have to try installing the unit in multiple places. Begin by finding a power outlet that is halfway between the router and the dead zone. Make sure that you avoid anything that could create interference such as glass or brick walls. Try the Wi-Fi extender there and see how it works. If it doesn’t provide satisfactory results, you may need to move it elsewhere.
- Multistory Homes
Living in a multistory home is great but it brings new complications. It is more common to have Wi-Fi dead zones in multistory homes. Thankfully, you can remedy this problem by installing a Wi-Fi extender or two. If the router is installed downstairs, you should try installing the extender upstairs. Just remember that the signal has to go through the floor. Therefore, you’ll need to place the extender reasonably close to the router. It should be directly above the router if possible.
You can always add another extender to eliminate dead zones at the other end of the house.
- Avoid Obstacles
Finally, you should know that certain objects can interfere with your Wi-Fi signal. This is very problematic because it’ll prevent your Wi-Fi network from covering your entire home. For instance, you should know that a mirror or piece of metal could create problems. It will reflect the signal and stop it from reaching other rooms. In addition to this, some objects will absorb the signal. You also have to worry about radio-frequency signals. Baby monitors, cordless phones, ovens, and refrigerators could interfere with the signal.
At the end of the day, installing a WiFi extender on your Xfinity network is a good idea. This will enhance the performance of your Wi-Fi network and eliminate dead zones. Just remember that you’ll need to find a compatible extender. In addition to this, you need to put it in a good location. Use the guide above to ensure that you get the results you want.
Meet Eriksson Ray. I’m the co-founder of TenWitch.com. Our website is dedicated to the coverage of product reviews, buyer’s guides, best lists, etc. We can help you to choose a new modem/router or troubleshooting your Internet connection.